23.4 Sending Audio From Another DAW App to REAPER
Staying with the same example, we are now going to use ReaRoute to take our open Sonar project and send an audio signal back to REAPER.
Kind: concept (user-guide-section) Chapter: 23 Using REAPER with Other Applications and Devices (Overview) Source: REAPER User Guide v7.70
Staying with the same example, we are now going to use ReaRoute to take our open Sonar project and send an audio signal back to REAPER. In overview, this is how it is done.
- Open REAPER and create a new project file. Insert as many tracks as you need. 2. Assign ReaRoute inputs to these tracks as required. Arm these tracks for recording. 3. Open the other DAW. In that DAW, open the file you wish to work on, and assign outputs on a track
by track basis to your various ReaRoute channels as required. 4. Still in the other DAW, insert any FX that you may wish to use in these tracks. Play the song in the
other DAW, adjusting your FX to suit. 5. When ready, start recording in REAPER, then play the song in the other DAW, from the beginning. 6. When finished, stop both playback and recording.